English
  • English
  • Chinese
Figure 1
Figure 2
Figure 3

PA6T

PA6T

Product introduction

1. Excellent welding resistance
PA6T has a high melting point (310 ° C) and a high thermal deformation temperature (about 290 ° C), thus showing excellent reflow solderability. The excellent welding resistance of PA6T makes it particularly suitable for electronic connectors for surface adhesion technology (SMT).
2. Excellent high temperature rigidity
PA6T can still maintain a very high modulus at high temperatures, for example, the modulus at 120℃ is 55% of the modulus at 23℃. In other words, PA6T can maintain stability and excellent rigidity over a wide temperature range.
3. Excellent chemical resistance
4. Low water absorption
For nylon resin, PA6T water absorption is quite low, only 1/4 to 1/3 of nylon 66. Therefore, the physical properties of PA6T caused by water absorption are relatively small.
5. Excellent dimensional stability
The water absorption rate of PA6T is quite low, and the size change caused by water absorption is quite small. The thermal expansion coefficient of PA6T is quite stable and remains at a fairly low level in the high temperature range, so it has good dimensional stability against temperature changes. In addition, PA6T has very little warping due to the forming process. In other words, PA6T has excellent dimensional stability.
6. Excellent mobility
PA6T has good melt flow and is easy to process by injection molding. In addition, PA6T also has excellent thin wall formability, making it suitable for the processing of small parts.
7. It is not easy to burr when forming
PA6T also has a characteristic inherent in nylon, which is not easy to burr during injection molding.

Other company products

Copyright @ Plastindex 2024. All rights reserved.